Beattie Electrical

Emergency Electrician Sydney

Beattie Electrical provides emergency electrician services across Sydney for homes, apartment buildings and small businesses. When you ring you speak to someone who understands what a tripping safety switch, a burning smell or a dead circuit can mean, and who can tell you what to do in the next five minutes while we organise getting to you.

Emergency Electrical Problems We Attend

Total Power Outage at Your Property

Half the House Without Power

Safety Switch (RCD) Tripping Repeatedly

Burning Smell from the Switchboard

Burning Smell from a Power Point or Switch

Sparking Power Points

Hot or Discoloured Power Points

Buzzing or Humming Switchboard

Exposed or Damaged Wiring

Cables Chewed by Rodents

Tingle or Shock from a Tap or Appliance

Storm-Damaged Electrical Equipment

Water in the Switchboard or Meter Box

Flood-Affected Power Points and Circuits

Flickering or Dimming Lights Throughout the Property

Blown Light Circuits

Failed Hot Water System Supply

Split System Electrical Faults That Trip the Circuit

Smoke Alarms Chirping, Faulty or Dead on Power Loss

Strata Common-Area Power Failure

Why Sydney Properties Have Urgent Electrical Faults

Sydney has its own particular mix of causes. The same few turn up again and again.

Older homes with original wiring and switchboards.

Terraces in Newtown and Leichhardt, brick bungalows in Ryde and Burwood, and many pre-1990s houses still run on switchboards designed for a fraction of today's load. Add a modern air conditioner, an induction cooktop and a home office, and an old circuit can overheat or trip constantly. Ageing wiring insulation can also break down quietly behind walls.

Storm season.

Sydney's summer storms bring lightning, flash flooding and falling branches. Water in a meter box, a tripped safety switch after heavy rain, and damaged overhead service lines are all common after a big front rolls through.

Salt air near the coast.

In places like Cronulla, Coogee and Manly, salt corrosion can eat into outdoor power points, meter box internals and switchboard connections.

Summer and winter demand.

Heatwaves push split systems, fans and fridges hard at the same time. Winter does the same with heaters. A circuit that is only just coping will often fail on the hottest or coldest night of the year.

Apartment buildings.

In blocks across Parramatta, Chatswood and the inner west, a fault in a common-area switchboard or a riser can affect many residents at once, which is why strata managers and building committees often need a fast, documented response.

Renovation damage.

Cables nicked by a drill, a nail through a wall or a light fitting installed incorrectly can sit dormant for months before they cause a fault.

Is It Your Property or the Network? A Quick Way to Tell

Not every blackout needs an electrician. Knowing which side of the meter the problem sits on can save you a call-out fee, or save you hours waiting for the wrong person.
What You Notice Most Likely the Network (Ausgrid, Endeavour Energy or Essential Energy) Most Likely Inside Your Property (Call an Electrician)
Street and neighbours Neighbours' lights are out too Neighbours have power; you don't
Pattern of loss Everything out, often with a storm or a visible street fault Only some circuits dead, or one room, or the lights but not the power points
Switchboard All breakers and the main switch look normal and on A safety switch or breaker has tripped, or won't reset
Smell or sound Nothing unusual at your switchboard Burning smell, crackling, buzzing or heat at the board or a power point
After restoration Power returns by itself Power returns to the street but not to you
Wires A line down on the street (keep well clear and report it to your network provider) Damaged wiring or fittings inside or on the property
Rule of thumb: if the whole street is out, it’s a network issue. If your property is out and everyone else is fine, the fault is on your side. Your main switch, safety switches or the consumer mains are the first things we check.

Standards and Compliance

Emergency doesn’t mean corners get cut. Our work is carried out in line with:

(the Wiring Rules), the core standard for electrical installations in Australia and New Zealand

administered by NSW Fair Trading and SafeWork NSW

for protecting circuits in homes

where alarms are involved in the repair

where an issue relates to the service line or point of supply

Where an emergency repair involves a Certificate of Compliance for Electrical Work, we supply it to the property owner or agent as required.

Why You Need a Licensed Electrician in an Emergency

It’s tempting to ask a handy friend or a general handyman to “just get the power back on.” In NSW, most electrical work legally has to be done by a licensed electrician, and there are practical reasons for that as well as legal ones.

Safety.

Electricians are trained to isolate, test and prove a circuit dead before touching it. Most electrical injuries happen when people assume something is off.

Finding the cause.

A fix that ends the symptom (bypassing a safety switch, swapping a breaker for a bigger one) can hide a fault that goes on to start a fire.

Compliance.

Work must meet the Wiring Rules (AS/NZS 3000) and other relevant Australian Standards, and certain work requires a Certificate of Compliance for Electrical Work (CCEW) to be issued.

Insurance.

Insurers commonly expect electrical repairs to be done by a licensed tradesperson. Unlicensed work can complicate a claim after a fire or damage event. Check your own policy wording.

Accountability.

A licensed contractor can be verified on the NSW licence register, and is responsible for the work they carry out.

Emergency Electrical Help for Homes Strata and Businesses

Homes and rentals.

Landlords and tenants both need a fast, documented fix. We can provide a written summary of the fault and repair for your property manager.

Apartment blocks and strata.

A dead common-area circuit, a failed stairwell light or a switchboard fault can affect every resident. We work with strata managers, committees and building managers, and can document the repair for your records.

Small businesses.

When the till won't boot, the cool room has tripped or the shopfront is dark, every hour costs money. We prioritise getting essential circuits safe and running, and arrange any larger repair for a planned time.

Where We Work

We provide emergency electrical services across Sydney, including the Inner West, Eastern Suburbs, North Shore, Northern Beaches, Parramatta and the Western suburbs, and the Sutherland Shire. If you’re not sure we cover your suburb, ring and ask. 

Frequently Asked Questions

What should I do if only part of my house has lost power?
Check the switchboard for a tripped safety switch or breaker, and look at whether neighbours still have power. If one circuit won’t stay on after a single reset, don’t keep forcing it. Something on that circuit needs testing.
Common causes are a faulty appliance, moisture getting into a fitting or outdoor power point, damaged wiring, or an earth fault. A safety switch trips to protect you from electric shock, so repeated resetting just ignores the warning.
No. If it trips again straight away, there’s likely an overload, short circuit or fault. Leave it off and call an electrician.
Stop using it, don’t plug anything else in, and switch off the circuit at the switchboard if it’s safe to do so. A power point that sparks, smells hot or looks scorched needs urgent inspection.
It can point to a loose connection, an overloaded circuit or a failing component generating heat. Treat it as serious. If you see smoke or flames, leave the property and call 000.
DC-motor fans use less power for the same airflow and generally run quieter, which is worth the extra cost in bedrooms or spaces you use often. AC-motor fans remain a solid, budget-friendly option for living areas.
Yes, but it needs to be rated for the location — damp-rated for a covered patio or alfresco, wet-rated for a fully exposed area. An indoor fan installed outdoors will corrode and fail early.
Most commonly this comes down to an improperly braced mounting point, blades out of balance, or loose screws in the blade brackets. It’s worth having checked rather than ignored, since a fan that’s coming loose from the ceiling is a safety issue, not just a noise annoyance.
Yes. Any electrical work in NSW, including ceiling fan installation, requires a Certificate of Compliance for Electrical Work (CCEW), which we provide on completion. Keep this with your property records — it can matter for insurance and when selling.
Get a free quote